At this moment, thousands of factories and workshops are equipped with an Easytherm induction heater. They have been applied for manufacturing, service and repairs all over the world since 2004, and many Easytherm products from the first batches of production are still heating today. Over the years, the product series has proven the benefits of induction heating and the reliability of the product to many.
The smallest Easytherm induction heater is the right choice for heating the smallest bearings (min. ID ø 10 mm, max. weight 10 kg). With the Easytherm 1 induction heater, correct mounting of small bearings is possible without damage.
Easytherm 2 is a compact induction heater that can heat bearings with a minimum ID ø 10mm. The Easytherm 2 can heat up bearings with a max. mass of 40 kg and max. OD ø 290mm. Very portable, due to its low weight.
Easytherm 3.5 is designed for more intensive use in service/repair and production environments, with a very wide application range of small to medium-sized bearings (min. ID ø 10mm – max. OD ø370mm).
For heating larger and heavier bearings with a max. mass of 150 kg and max. OD ø 490mm, the Easytherm 15 is a powerful and reliable tool. The ET15 is made for very intensive use in industrial environments.
Easytherm 30 is our largest Easytherm induction heater. Bearings with max. mass of 300 kg and max. OD ø 660mm. The ET30 can also be supplied on a trolley (optional), so the device can be used on different locations in the workplace.
With our latest generation of low frequency heaters, we offer the most efficient heaters for a wide range of applications. Equipped with 2 Sensor Technology, SURETHERM assures safe and stress-free heating where only the part is heated. Efficient power regulation takes care of the rapid heating process. Four different heating modes: always the right and optimal heating mode for your specific heating task.
The SURETHERM 10X may be small, but proves to be a powerful induction heater showing great flexibility. The device is suitable for small-sized components up to 50 kg, max. diameter of 450 mm (when used with extension yokes).
The SURETHERM 20X is a stationary induction heater with ergonomic pivoting yokes. The pivoting yoke makes for easy workpiece handling as there is no need to lift the part and remove the yoke.
Designed for use in maintenance shops and production areas, this heating tool can heat parts with a maximum weight of 200 kg, and a diameter of up to 600 mm (840 mm when used with extension yokes).
SURETHERM PRO 1X
With a small footprint of only 850 x 410 mm, the SURETHERM PRO 1X is a small powerhouse, able to heat bearings up to 400 kg. The SURETHERM PRO 1X can also be supplied on a trolley (optional).
SURETHERM PRO 1X-P
Our SURETHERM PRO 1X-P shares most characteristics with the PRO 1X, but is equipped with a horizontal U-core and pivoting yokes. The SURETHERM PRO 1X-P can also be supplied on a trolley (optional).
SURETHERM PRO 3X
Our SURETHERM PRO 3X is designed for intensive use in industrial environments. Easily heat bearings up to 800 kg, with min. ID ø 40 mm and max. OD ø 1500 mm.
SURETHERM PRO 6X
Our SURETHERM PRO 6X is designed for intensive use in industrial environments. Easily heat bearings up to 1600 kg, with min. ID ø 85 mm and max. OD ø 2000 mm.